Docs

Browse Console - User guide

Introduction

The Unbxd Browse allows you to personalize the browsing experience of shoppers on your site by powering pages using several signals like purchase history, product preferences, and current online behavior.
These services are easily controlled and monitored by an advanced interface called the Console. The console was built from ground up keeping mainly merchandisers in mind and includes controls like multi-level merchandising, in-depth reporting, multi-user accessibility ,etc., to help you expose your product inventory in the most optimized way.

Getting started

The Browse Console User Guide will guide you to use the console features and help make the most out of Unbxd Browse on your site or app.

Sign-up

To access the console, you must first fill in your details on the signup form. Your Account Manager will share the signup form link.

Notes:

  • Website URL: Enter the URL of your ecommerce site/app for which you want to integrate the Unbxd Browse. This will add a site on the console and link your site/app to it. You can also add more sites from the console’s interface.

  • Region: This indicates the physical location of the Unbxd servers (Singapore and US). You can choose the option closest to your server to get the best response. For example, if you are based out of Asia Pacific (APAC) region, choose Singapore, else select US.

Choose your Platform

It is important for us to understand your platform (custom or third-party) in order to provide the best way to integrate. For example, third-party platforms like Magento, have its service extension/plug-in help integrate from its configuration interface.

You can choose from a list of third-party platforms we support or if your site is built on a custom platform, you can select Self Designed Platform.

Integration

After you have selected your platform, the next step is to integrate Unbxd Browse on your site/app.
Before you integrate, you must do the following:

  • Upload Catalog
  • Configure Unbxd Analytics

If you haven’t completed the steps above, the console will walk you through the same.

Upload Catalog

All Unbxd services work based on your catalog data, which must be formatted in a specific format before sending it to us. We use this data to create product indexes that makes it easy for us to find that needle in the haystack, figuratively speaking.

After you have successfully created the Unbxd version of your catalog, you can click Catalog Upload to upload or directly call our API as mentioned in the documentation.

For more information about catalog upload, see here.

Configure Unbxd Analytics

Unbxd Analytics is an advanced tracking tool that captures browsing behaviors of visitors on your site. This behavior is used to enhance category pages experience of visitors.
For more information about Unbxd analytics, see here.

Configure Browse

After you have completed the steps above, you can configure Unbxd Browse in your site. You can further choose to integrate via:

  • RESTful API
  • AJAX-based
  • SDK libraries

Refer the documentation.

After you have successfully integrated, you are now ready to learn different features of Unbxd Console.

Basic Settings

Let’s start from some of the basic and essential settings before you move on to much-advanced ones. The following settings can be accessed at any point on the console, such as:

  • Site Selector

    You can click + Add New Site to add new sites to the console. The Site Selector dropdown lets you switch between sites from main menu in order to make setting changes on them. The current site name will be displayed here.

  • Profile Settings

    The profile settings option is aesthetically positioned on the top right side of the console. Apart from the usual settings, you can change your account password from here.

Dashboard

The Dashboard section displays an overview of the Unbxd Browse’s performance in your site according to different performance metrics for a default rolling period of last 14 days.

The Unbxd performance metrics are explained below.

NameDescription
Last Indexing StatusThe status (“INDEXED” or “Error”) of the recently uploaded catalog data.
Total no of ProductsThe total number of products after your last uploaded catalog data.
Last Catalog UploadThe date of the recent catalog upload.
Page ViewsThe total number of page views for your site.
Product ViewsThe total number of PDP (Product Detail Page) views on your site.
Add to CartsThe total number of products added to cart on your site.
Products SoldThe total number of products sold on your site.

Category Pages Revenue Graph

The graph shows the revenue generated per day for last 14 days.

NameDescription
Total RevenueTotal revenue generated on your site.
Revenue / Category Page VisitRevenue generated per category page visit. This metric helps you understand the conversion at a category page visit level.
Revenue / Page ViewRevenue generated per page view. This metric helps you understand the conversion from a page view level.

Page View vs. Visit Graph

The graph shows the number of Page Hits (Page view and Visits) on a daily basis.

Merchandising

The Merchandising section of the console provides useful controls that will help you merchandise products in your inventory.

Browse

You can merchandise pages integrated using Unbxd Browse based on your business rules by creating campaigns in the console.
There are three types of rules you can create:

  • Site Rule
  • Page Rule
  • Field Rule

Note: In case of conflicts between rules this order of precedence will be followed on the category page results: Site Rule > Page Rule > Field Rule.

Site Rule

Site rule is applied site-wide, that is across all pages on the site. You can perform the following two actions:

  • Boost
  • Filter
Boost

Boosting and burying can be done on 100 levels, allowing for soft boost and soft bury. Earlier, Unbxd used to support 3 levels of boosting (high, moderate, low) and just 1 level of demoting.

The mapping between old boost scoring to new scoring is mentioned below:

Boost of High in old scoring => Boost of level +40 in new scoring
Boost of Moderate in old scoring => Boost of level +20 in new scoring
Boost of Low in old scoring => Boost of level +10 in new scoring
Demote in old scoring => Bury of level -100 in new scoring

The boost levels above determine the position of the products (from top to bottom respectively) on all the pages integrated using Unbxd Browse, for example, Category, Brand etc.

Filter

Filtering in a site rule allows you to refine the products for all the pages based on attribute rules.

To add a site rule:

  1. Navigate to MerchandisingCategory PagesSite Rule.

  2. Click + Add Site Rule.

  3. If you want to edit existing site rule, click View Site Rule, follow steps 4 through 7, and then click RE-PUBLISH.

  4. To create a boost group, on the Boost tab, do the following:

    1. Select field name from the dropdown list.
    2. Select comparator based on the field (equal to, not equal to, contains, does not contain).
      Note: For the field “price”, comparator options are equal to, in between, more than, less than.
    3. Specify the value.
    4. Move the slider to assign a boost level. The default value of boost is Low.
    5. To add multiple attribute rules for a boost group, click Add attribute rule.
    6. To create multiple boost groups, click .
      Tip: As a best practice, always assign different boost level across different boost group in order to get the desired arrangement of the results.
  5. To create a filter group, click the Filter tab, and then do the following:

    1. Select field name from the dropdown list.
    2. Select comparator based on the field (equal to, not equal to, contains, does not contain). For the field “price”, the comparator options are equal to, in between, more than, and less than.
    3. Specify the value.
    4. To add multiple attribute rules for the filter group, click Add attribute rule.
    5. To create multiple filter groups, click .
      Only the products that satisfy all the attribute rules and filter groups will be shown in the results.
  6. Click NEXT.
    The Facets tab appears. You can also enable/disable the facets and the order in which they should appear across the site for all the pages.

    If you want to add a new facet, you can navigate to ManageConfigure Site to add facets. For more information on configuring facets, see Configure Facets.

  7. To reposition a facet, do the following:

    1. Hover on the facet row you want to reposition. The reposition icon appears.
    2. Click , and then drag the facet to a new position.
    3. If you want to show the facet on your site, in the Show column, select the respective facet checkbox.
    4. Click to save the changes.
  8. To edit values of a facet, do the following:

    1. Click the facet for which you want to edit the values.
    2. Click .
    3. Type the new facet length.
    4. Select sort order for your facet. You can sort either by product count or alphabetically.
    5. Click Save.
  9. To go to the previous screen, click PREV.

  10. Click PUBLISH.

Field Rule

Field rules are used to create facets and banners for a specific page. By default, facet under Site Rule is inherited to all the pages, however you can override them by creating a field rule for that particular page.

To create a field rule:

  1. Navigate to MerchandisingCategory PagesField Rule.

  2. To add fields, do the following:

    1. Click .
    2. Select the fields you want to use. You can also search the fields.
      Note: You can select a maximum of five fields.
    3. Click Apply.
      The selected fields appear in the Create Field Rule window.
  3. Click .
    The Create Field Rule window appears.

  4. Select the field you want to use.

  5. Select the respective field value.

  6. Click CREATE FIELD RULE.
    The new field rule is added in the Field Rule tab.

  7. Click the field rule you want to publish.

  8. To set up banner using an image url, do the following:

    a. Click Image url.

    b. Enter the url of an existing banner image.

    c. Enter the corresponding landing page url.

  9. To set up banner using HTML, click HTML, and then paste your banner html code.

  10. Click the Facets tab. You can navigate to ManageConfigure Site to configure facets. For more information on configuring facets, see Configure Facets.

  11. To reposition a facet, do the following:

    1. Hover on the facet row you want to reposition. The reposition icon appears.
    2. Click , and then drag the facet to a new position.
    3. If you want to show the facet on your site, in the Show column, select the respective facet checkbox.
    4. Click to save the repositioning changes.
  12. To edit values of a facet, do the following:

    1. Click the facet for which you want to edit the values.
    2. Click .
    3. Type the new facet length.
    4. Select sort order for your facet. You can sort either by product count or alphabetically.
    5. Click Save.
  13. To go to the previous screen, click PREV.

  14. Click PUBLISH.

Page Rule

Page Rule allows you to manually customize the product order for a particular page. Merchandisers can use page rules to apply their business logic or run promotional campaigns on top of Unbxd AI. For example, run a clearance campaign for Shoes category, boost Nike products that are on promotion at the top.

You can use the Page Rule tab to manage your campaigns. You can do the following:

  1. Creating a campaign

  2. Merchandising

    • Start Merchandising
      • Boost
      • Sort
      • Slot
      • Pin
      • Filter

    • Create a landing page
    • Redirect to an existing page

3. Setting experience

Creating a Campaign

You can use the Page Rule tab to create campaigns for queries.

To create a campaign:

  1. Navigate to MerchandisingCategory PagesPage Rule.

  2. Click .

  3. Select the category path(s) for which you want to create rule.

  4. Click ADD.
    The category path appears.

  5. Click the category path to create a campaign.

  6. Click .
    The Campaign Details section appears.

  7. Type the name of your campaign.

  8. Enter the start date and end date to specify the duration of the campaign in your site. The end date is optional.

  9. Select the time zone for the campaign.

  10. Type a brief description for your campaign.

  11. Click NEXT.
    The Define Audience section appears.

  12. If you want to generate an URL for your marketing campaigns, select the Generate URL for your Marketing Campaigns checkbox.
    A parameter appears. You need to pass this parameter in the page’s URL to trigger the campaign. For example, you can add this parameter in the page URL for which you can send in your email campaigns to your customers. When any shopper lands on the page through that email, he/she would see the products corresponding to the campaign.

  13. Click the circle to select a segment for which you want to run your campaign. A segment can consist of specified locations, devices, and users. For more information on creating segments, see Segments.

  14. To apply globally, click the circle to select Global Segment.

  15. To view details of a segment, hover on the segment, and then click View Details.

  16. To duplicate a segment, click , and then click Duplicate.

  17. To delete a segment, click , and then click Delete.

  18. Click NEXT.
    The A/B Testing section appears.

  19. If you want to perform A/B testing on the products for the page, do the following:

    a. Click YES.

    b. For Group A, enter the percentage of total visitors that you want, should see this group.

    c. Do one of the following:

    • If you want Group B as your merchandising comparison with Group A, click ADD GROUP B, and then enter the percentage of total visitors that you want, should see this group.
    • If you want Unbxd Algorithm as your merchandising comparison with Group A, click ADD UNBXD DEFAULT, and then enter the percentage of total visitors that you want, should see this group.

    Note: You can only test two groups at a time.

    d. Do one of the following:

    • If you want to set the winner by click rate, select Click_Rate, and then type the duration for your A/B test.
    • If you want to set the winner by average order value, click Average_Order_Value, and then type the duration for your A/B test.

    Note: The recommended duration for A/B test is 24 hours.

    e. Select the preferred option ( for example, between Group A and Group B, you can select Group A or Group B) in case there is no winner after the A/B test.

    f. Click NEXT.

    g. If you have chosen Group A and Group B to test your merchandising options for your campaign, set the merchandising option and experience configuration for both the groups separately. For more information on different merchandising options, see Start Merchandising.

    Note: For setting the experience for both groups, see step j and k.

    h. To set up banner using an image url, do the following:

    • Click Image url.
    • Enter the url of an existing banner image.
    • Enter the corresponding landing page url.

    i. To set up banner using HTML, click HTML, and then paste your banner html code.

    You can also view the status of the A/B testing.

20.Click NEXT.
The Merchandise section appears.

Merchandise

The Merchandise section has a two-panel interface where one shows the different merchandising options and the other shows a real-time preview of your results for a particular page. The changes are reflected on your site once you publish.

You can:

  • Start merchandising
  • Create a landing page

To start merchandising, in the Merchandise section, click START MERCHANDISING.

Start Merchandising

As the name suggests, this option lets you start right away with merchandising the products for a specific page.
Merchandising includes:

  • Boost
  • Sort
  • Slot
  • Pin
  • Filter

Boost

Boosting within a page rule lets you promote (or demote) products for a particular page based on a specified condition. For example, a boost rule can be created for a category to boost products with field name “color” and value “red” to the top of the page results.

Boosting and burying can be done on 100 levels, allowing for soft boost and soft bury. Earlier, Unbxd used to support 3 levels of boosting (high, moderate, low) and just 1 level of demoting.

The mapping between old boost scoring to new scoring is mentioned below:

Boost of High in old scoring => Boost of level +40 in new scoring
Boost of Moderate in old scoring => Boost of level +20 in new scoring
Boost of Low in old scoring => Boost of level +10 in new scoring
Demote in old scoring => Bury of level -100 in new scoring

The boost levels above determine the position of the products (from top to bottom respectively) on a specific page integrated using Unbxd Browse, for example, Category, Brand etc.

To create a boost group:

  1. In the Merchandise section, click START MERCHANDISING.

  2. On the Boost tab, select field name from the dropdown list.

  3. Select comparator based on the field (equal to, not equal to, contains, does not contain).

    Note: For the field “price”, comparator options are equal to, in between, more than, and less than.

  4. Specify the value.

  5. Move the slider to assign a boost level. The default value of boost is Low.

  6. To create multiple attribute rules for the boost group, click Add attribute rule.

  7. To add multiple boost groups, click .

    Tip: As a best practice, always assign different boost level across different boost group in order to get the desired arrangement of the results.

Sort

Sorting allows you to rearrange the products based on certain fields in a particular order. Products can be sorted in either numerical (ascending/descending) or alphabetical order (A-Z or Z-A) depending on the field value. By default, Unbxd sorts your products based on relevancy.

To create a sort group:

  1. In the Merchandise section, click START MERCHANDISING.

  2. Click the Sort tab.

  3. Select field name from the dropdown list.

  4. Select sort order (ascending and descending or ascending A-Z and descending Z-A).

  5. To add multiple attribute rules for the sort group, click Add attribute rule.

Products will be sorted according to the order of the sort rules defined. Subsequent rules will be applied to only those products that have the same values for the preceding sort field.

For example, if you have created a sort group with the following attribute rules:

  • price (ascending)
  • color (A-Z), and
  • brand (A-Z)

The products will be in this order:

  • Products with same price and color, sorted on brand (A-Z)
  • Products with same price sorted on color (A-Z)
  • Products sorted on price (ascending)

Note: You cannot create sort groups when a boost/slot/pin rules exist.

Slot

Slotting can be used in scenarios where products need to be promoted in only specific positions, preferably at the top of the page.

To create a slot group:

  1. In the Merchandise section, click START MERCHANDISING.

  2. Click the Slot tab.

  3. Specify the start and end positions of the slot range.

  4. Select field name from the dropdown list.

  5. Select comparator based on the field (equal to, not equal to, contains, does not contain).

    Note: For the price field, comparator options are equal to, in between, more than, and less than.

  6. Specify the value.

  7. To add multiple attribute rules for the slot group, click Add attribute rule.

  8. To create multiple slot groups, click .

Only the products that satisfy all the attribute rules will be shown in the slot. Each slot group allows you to define 10 positions.

Tip: As a best practice, always choose different slot range for different boost group in order to get the desired arrangement of the results.

Pin

Pinning lets you arrange your products by placing individual products on specific positions on the page.

To pin your product:

  1. In the Merchandise section, click START MERCHANDISING.

  2. Click the Pin tab.

  3. Enter the position number, and then click .

To pin using CSV:

  1. In the Merchandise section, click START MERCHANDISING.

  2. Click the Pin tab.

  3. Open the Manage dropdown next to the search bar.

  4. To pin multiple products, you can:

    • Upload a CSV file of the product-position map
    • Download a CSV file with the existing positions, edit, and then upload.
    • Download a CSV template, edit, and upload
  5. To remove all pins, click on Clear Pins.

Note: You cannot pin products on slotted positions.

Filter

Similar to filtering in a site rule, filtering on page campaigns allows you to refine the products of a particular page based on attribute rules.

To create a filter group:

  1. In the Merchandise section, click START MERCHANDISING.

  2. Click the Filter tab.

  3. Select field name from the dropdown list.

  4. Select comparator based on the field (equal to, not equal to, contains, does not contain).
    For the field “price”, comparator options are equal to, in between, more than, and less than.

  5. Specify the value.

  6. To create multiple attribute rules for the filter group, click Add attribute rule.

  7. To create multiple filter groups, click .
    Only the products that satisfy all the attribute rules and filter groups will be shown in the results.

Creating a Landing Page

Unlike Start Merchandising, landing pages allow you to merchandise on the entire catalog and not just the products relevant to a particular category.

Landing pages are useful for creating result pages for new categories or categories such as "sale", "Discounts", etc. All merchandising rules such as filter, sort, boost, slot, and pin would be available in this section.


To create a landing page, in the Merchandise section click CREATE A LANDING PAGE.

Setting Experience

The way a page appears greatly impacts visitors’ searching patterns. This makes showcasing the right options at the right places on the results page equally important. Setting the experience is the last step for publishing your page campaign and involves setting the banner.

To set up banner:

  1. After the merchandising step, click NEXT.

  2. To set up banner using an image url, do the following:
    a. Click Image url.

    b. Enter the url of an existing banner image.

    c. Enter the corresponding landing page url.

  3. To set up banner using HTML, click HTML, and then paste your banner html code.

Publish

After you are done creating/configuring your banners, you can click PUBLISH to publish your campaign for the created page rule. A page displays essential information about all the created campaigns in a tile view.

Managing your Campaign

For a particular rule, a campaign can exist in one of the following states.

Campaign StateDescription
ActiveCampaigns that are currently running on your site/app. These campaigns are marked green. You can edit or duplicate an Active campaign and re-publish it.
UpcomingCampaigns that are to be published on a later date. These campaigns are marked blue. You can edit or duplicate an upcoming campaign and re-publish it.
DraftsCampaigns that are not yet published.
StoppedActive campaigns that have been ‘stopped’. A stopped campaign cannot be restarted again. However, you can duplicate a stopped campaign and re-publish it.
ExpiredCampaign that has crossed its end date. You can duplicate an expired campaign and re-publish it.

To access campaign actions:

  1. Navigate to MerchandisingCategory PagesPage Rule.

  2. Click a page rule to access all the related campaigns.

  3. To edit a campaign, click .

  4. Click to access the following commands:

    • Stop: Allows you to stop a campaign.
    • Delete: Allows you to delete a campaign.
    • Duplicate: Allows you to duplicate a campaign.

Notes:

  • You can delete any campaign.
  • A duplicate campaign will have suffix “copy” added to its original campaign name.
  • No two campaigns can be active for the same device type on the same date range.

Segments

The Segments section allows you to target a particular set of visitors based on a particular location, device type, or user type.

Creating a Segment

To create a campaign:

  1. Click Segments.
    The Segment section appears.

  2. Click .

  3. Type the segment name.

  4. In the SHOPPERS BELONGING TO list, include or exclude your shoppers based on Location, Device Type, or User Type.

  5. To create multiple groups based on location, device type, and user type, click Create New Group.

  6. Click SAVE.
    The new segment displays in the Segments section.

  7. To edit a segment, click .

  8. To delete a segment, click , and then click Delete.

Reports

The Report section gives you in-depth insights on the visitor interactions, page and product performances. Merchandisers can take quick actions on pages, and fields on the site by referring to the Reports section of the console.

Overview

The overview page gives holistic view of essential performance metrics such as Clicks, Carts, Orders, %Conversion Rate, Top Page Views, Top Clicked Products, and Top Ordered Products, Zero Results Pages for the last 15 days. It helps merchandisers get a complete understanding of the trending queries, products and the zero results pages on a quick glance.

You can toggle between two types of graphs:

Overview

The Overview section gives a holistic view of essential performance metrics such as Clicks, Carts, Orders, %Conversion Rate, Top Searched Queries, Top Clicked, and Top Ordered Products, Zero Results Queries for the last 15 days. It helps merchandisers get a complete understanding of the trending queries, products, and zero results queries on a quick glance.

You can toggle between two types of graphs:

  • Trend

    The trend graph lets you view the performance comparison of any two metrics for the selected time frame. You can choose to view the trends of - page views, carts, orders, and conversions and lets you easily switch between Daily, Weekly and Monthly reports.

  • Funnel

    The funnel graph shows you the conversion funnel of the essential performance metrics data (hits, clicks, carts, orders) for the selected time frame.

The Zero Result Pages report helps merchandisers view all the pages for which the visitors have seen no result. It is always a best practice to merchandise on the zero result pages first using the various merchandising options the console provides. You can avoid showcasing Zero Results page by, creating landing pages and redirects.

Page Level Reporting

The page level reporting section gives a detailed report of pages based on hits, click through rate, clicks, carts, orders, %conversion, and revenue per browse. You can search for any query using the search button and download reports in CSV format.

Merchandisers can also drill down to performances of each individual page by clicking on it. Doing so can will show you the trends and the funnel report for that particular page. Merchandisers can also view the the details of the popular products for the particular page.

The queries are sorted on hits in ascending order by default, you can however sort on any of the other metrics. A standard date selector interface lets you change the time period for the report. You can also search for a query using the search option.


Manage

The Manage section provides all the essential configuration controls over your account, sites, and other console settings.

Configure Site

This section provides all the essential controls and options for making an API call and configuring your catalog data.

Navigate to ManageConfigure Site.

Keys

Keys are required for making an API call to Unbxd platforms from a particular site. All API calls to Unbxd are authenticated using these keys:

Site Key

Every site added on the console has a unique alphanumeric site key, which is used in all API calls to help us identify your site. A sample site key for a site named “testing” looks like: testing-u1478243900645.

API Key

Every Unbxd account has a unique hexadecimal API key, which helps us to identify your account. Similar to the site key, the API key is also used in every API call.

Secret Key

Every account also has a unique 32-digit hexadecimal secret key. Unlike other keys, the secret key is not exposed in the URL, making it safe and easy to delicate operation, such as catalog upload.

API

APIs are the building blocks of Unbxd Browse.

Navigate to ManageConfigure SiteAPI.

This section provides API calls on the ready for various operations:

  • Commerce Category Pages API
  • Catalog Feed API

You can easily copy these API signatures and start making calls to Unbxd platform.

For more information about APIs, see here.

Catalog

You can easily upload or re-upload your catalog data. If you were not able to upload your catalog data in the beginning, you can do it from this section any time.

Navigate to ManageConfigure SiteCatalog.

Note: Every upload will be considered as a full-feed upload. A full-feed upload will replace all the previously uploaded data.

This section also displays the following information.

NameDescription
Catalog InformationShows the total number of existing products.
Last Upload InformationShows the number of products uploaded in the recent upload and the indexing status.
Upload InformationDetails of the current upload. This includes:
  • Feed File name
  • Status (Indexed or Error)
  • Date
  • Time
  • Upload Type

For more information about catalog upload, see here.

Field Mapping

You can map essential fields from your catalog with Unbxd dimensions (also known as the Featured Fields) in order for the search engine to leverage semantic relevance. In other words, mapping the Unbxd dimensions helps us better understand your catalog. There are 26 such fields.

To map your fields with Unbxd:

  1. Navigate to the ManageConfigure SiteField Mapping.

  2. Click

  3. Select the field from the dropdown list for its corresponding Unbxd dimension.

  4. Click Update.

Field Properties

You can view all the fields in your catalog and its field properties.

Navigate to ManageConfigure SiteField Properties.

The table below describes the field properties.

NameDescription
Field typeDetermines the datatype of a field. A data type determines whether a field is searchable or not. There are 6 different types of data types. For example, fields like description, meta_description etc., are configured to “descriptive-text” which is non-searchable.

For more information about Unbxd datatypes, see here.
Multi-valuedDetermines whether a field can have multiple value for a product. For example, usually products come in different colors hence if a product say, “Wrangler plain t-shirt” comes in different colors, then the multi-valued property for the “color” field must be set to “Enable” in the schema.

To make changes on field properties, you need to edit your catalog data (also known as Product Feed) and re-upload it from the console.

Note: You can sort the field properties by ascending or descending order.

Configure Facets

This section lets you configure global facets.

To add a facet:

  1. Navigate to ManageConfigure SiteConfigure Facet.
    A table on the left displays existing facets and a facet configuration panel on the right.

  2. Click

  3. Type the display name of the facet.

  4. Select the appropriate attribute.
    The facet type is automatically loaded.

  5. Specify the facet length. This determines the number of values displayed under a facet field.

  6. In the Sort Order list, do one of the following:

    • To set your sort order as per the product count, click Product Count.

    • To set your sort order alphabetically, click Alphabetical (A-Z).

  7. To configure range facets for fields like price, size, etc, specify ranges in Range Start, Range Gap, and Range End.

  8. Click Save.
    The new facet will appear in the list of global facets on the left panel.

For more information about facets, see here.

To edit a facet:

  1. Navigate to ManageConfigure SiteConfigure Facet.
    A table on the left displays existing facets and a facet configuration panel on the right.

  2. Click the facet you want to edit.

  3. Click .

  4. Edit the display name.

  5. Click Update.